LYRA, your CAD/CAM production centre
Our expert CAD/CAM centre based in France for laboratories can manufacture a large number of prosthetic components for use on natural teeth or on implants using digital technology.
A fully French centre
Raw materials are of certified European origin. Optimum traceability from material to shipped product.
Short lead times
Between 24 and 48 hours for simple orders (sleeves, bridge frameworks) and 48 to 96 hours for more complex orders (personalised abutments, implant bars).
A local partner
Telephone assistance available Monday to Friday to answer your questions.
High level of technicality and equipment
Laser sintering design
Our CAD/CAM centre is equipped with one of the most high-performance machines on the market to meet your requirements and comply with the most stringent quality standards. The laser sintering technique allows you to rapidly and economically produce sleeves, crowns or dental bridges in cobalt-chromium with complex forms.
Production by Machining
Our CAD/CAM centre has a fleet of 5-axis continuous machining systems. The performance of these high-precision machines ensures optimum adjustment and a high-quality surface.
Production by 3D printing
Our 3D production centre is equipped with high-performance printers that produce 3D models to finalise your prosthetic components.
Quality materials
Zirconia
• Yttria-stabilized tetragonal zirconia (3Y-TZP-A)
• Biocompatibility
• Exceptional mechanical properties
• Excellent chemical durability
• Zirconia qualified by mechanical endurance tests
• Panel of 16 shades + white
• 100% quality control


PMMA
• Certified high quality for making crowns and temporary bridges
• Biocompatibility
• Available in 3 colours: A1, A2 and A3

E.MAX
• Efficient manufacture of entirely anatomical restorations, highly resistant (360MPa) and durable.
• Available in 7 shades: A1, A2, A3, A3,5, B2, C1 and D2
• 2 degrees of translucency: HT and LT depending on shades
• Components supplied on blocks

Cobalt-Chromium
• CoCr dental alloy for fixed dental prostheses (according to ISO 22674) without nickel and without beryllium
• High quality
• Low thermal conductivity
• Good adherence to ceramic
• Optimum physical properties

Titanium
• TiAl6V4 titanium alloy
• Grade 5 medical (according to 5832-3)
• Good resistance to fatigue, crack propagation, corrosion and creep
• Material produced according to ASTM B 3148 or ASTM 265 standards

Multilayer Zirconia
• Yttria-stabilized tetragonal zirconia (ZrO2, Y2O3)
• Biocompatible
• Excellent chemical durability
• 2 more translucent UTML versions for single-units and STML for bridges with up to 3 elements
• 4 layers from incisal up to the dentin
• Panel of 16 shades

Products are guaranteed against problems
Lyra agrees to replace any defective secondary part with the same secondary part, free of charge.
– Zirconia: 5 years
– Cobalt-chromium or machined titanium: 10 years
– E.max or Numerys: 1 year
– PMMA: 3 months
Problems, questions? Contact our customer service by phone or email
Monday to Friday 8:30am to 12:00pm and 1:30pm to 5:30pm